Maintenance Knowledge Of Electric Vibratory Hammer

Because the Electric Vibro Hammer hydraulic press generally operates in a harsh environment, prone to malfunctions, daily and regular maintenance is essential to eliminate potential problems and shorten maintenance cycles. So, what are the common maintenance tips for the Electric Vibro Hammer hydraulic press?

1. Daily Maintenance and Repair

1) Keep the Electric Vibro Hammer hydraulic press clean. After each shift, wipe away oil, dust, rust, and water stains on the hammer body and power unit.

2) Regularly inspect all fasteners on the Electric Vibro Hammer hydraulic press to ensure secure and reliable connections.

3) Lubricate all lubrication points according to lubrication requirements.

4) Maintain a normal hydraulic oil level and temperature in the reservoir. Regularly check the oil cleanliness to prevent contamination.

5) Regularly check the Electric Vibro Hammer hydraulic oil tank for water ingress. If water ingress causes emulsification, immediately remove the water or replace the hydraulic oil.

6) Regularly check all instruments for stability and proper function. If not, repair or replace them.

7) Inspect the hydraulic system for leaks and address them promptly. 2. Regular Maintenance and Care for the Electric Vibro Hammer

Clean the electrical box and replace the hydraulic oil regularly. During the run-in period, replace the hydraulic oil after 500 hours of continuous operation, twice after three months, and three times after the ninth month. Subsequent replacement schedules will vary depending on the situation.